• Home Page |
• A-Z Site Map

• 
• 
  • Standard Services
  • Insitu Testing
  • Laboratory Materials Testing
• 
  • Earthworks
  • Foundation Design
  • Subsidence
  • Soakaways
• 
  • Contaminative Uses Desk Study
  • Pre Purchase Site Assessment
  • Contaminated Land Investigation
  • Remediation
  • Waste Classification
  • Environmental Impact Assessments
  • Asbestos Surveys
  • Japanese Knotweed
  • Environmental Services for Loss Adjusters
  • Ground Source Heat Pumps
• 
  • Geotechnical
  • Environmental & Remediation
• 
• 
• 
• 
  • Contact Details
  • Contact Form
•  

You are here: Home Page > Site Investigation > Laboratory Testing

Our purpose built in-house laboratories are equipped to provide comprehensive geotechnical soil and material testing services and meet the appropriate British and European Standards.

We also provide a full range of contamination / environmental compliance testing suites accredited to UKAS and MCERTs for soils, waters and gases.

Our range of services enable customers to purchase a full solution including collection of samples, transportation, testing, analyses, advice and guidance.

A selection of the tests available are outlined below.

Soils

Moisture Content Atterberg Limit Tests Linear Shrinkage Bulk & Dry Density by Linear Measurement Saturation Moisture Content of Chalk PSD Wet Sieve Method PSD Pipette Method pH value Water Soluble Sulphate Organic Content B.S. Compaction Test Lime Stabilization Testing Laboratory CBR Test Consolidation Test Consolidated Undrained Triaxial Test Shear Box Test Laboratory Vane Test Permeability Test

 

Aggregate & Concrete

Flakiness Index Elongation Index Moisture Content Aggregate Crushing Value Ten per cent Fines  Value Determination of Mix Proportions (mortar) Chloride Content Concrete Carbonation Testing Concrete Cube Compressive Strength Concrete Core Compressive Strength Blacktop Analysis (Binder Content and PSD Sieve)

Rock

Uniaxial Compression Test (UCS) Point Load Index Test

Contamination / Environmental Compliance Suites

Key testing suites provided to our present clients include:

• ICRCL 59/83 Tables 3 and 4 (STL Key Contamination Suite)
• NRA and DIN Leaching test
• Asbestos
• Metals
• Biological oxygen demand
• Chemical oxygen demand
• Phenols
• Cyanides
• Sulphates / sulphides / sulphur
• Thiocyanates
• Mineral oils
• Polynuclear aromatic compounds, Coal tars
• Solvent extractable material
• Total organic carbon
• Calorific value, Nitrates, nitrites
• Dioxin and Furan Analysis
• Polychlorinated Biphenyls (PCB)
• Polyaromatic Hydrocarbons (PAH)
• Heavy Metals
• Particulates
• Acid gases
• Combustible gases
• Semi volatile Organics
• Volatile organics
• Pesticides
• Gas Analysis
  

 

Please contact our Laboratory Manager for further Information. Contact Details